tvet 9Mi

Home    Products

tvet 9Mi

The most cost-efficient solution for your veterinary clinic

Overview

The perfect Autoclave developed exclusively for Veterinarians. The tvet line fits all your sterilization needs by creating cycle parameters to accommodate double wrapped pouches. These cycles ensure sterility and efficient drying of packs and pouches, helping veterinarians meet today’s challenging workloads.

The small but mighty tvet 9Mi offers unparalleled quality for clinics on a budget. This maintenance free plug-and-play autoclave features a 19 liter stainless steel chamber, just big enough to fit your most important veterinary equipment. Activate each stage of the sterilization cycle with a single touch. Packed with features for the fastest, most versatile operation, the tvet 9M delivers outstanding performance , unmatched safety features and intuitive controls for the most demanding high volume environments.

Tuttnauer tvet 9Mi manual autoclave will compliment any veterinary facility and satisfy of your sterilization needs. The bright, new easy to use panel was designed with the operator in mind. Long term reliability and durability are built into every Tuttnauer product.

  • 19 Liter chamber
  • Automatic shutdown at the end of both the sterilization and dry cycles
  • A long lasting electro polished Stainless Steel chamber and door
  • Intuitive Control. Designed with the operator in mind, the colorful control panel is intuitive and easy to use
  • Double safety locking device prevents door from opening while chamber is pressurized
  • Quick and easy water drainage with valve positioned on autoclave front
  • Rapid air removal. High volume water-ring vacuum pump for fast and efficient air removal
  • Dual safety thermostat to protect against overheating
  • 3 trays, tray handle included
  • 1 year parts and labor warranty and 10 year chamber warranty
tvet 9Mi Veterinary Autoclave

An optimized program for every load

Cycle Type Sterilization Drying Total
Standard Unwrapped Cycle Time (Hot Start) 4 min. 1 min. 20 min.
Standard Wrapped Cycle Time (Hot Start) 7 min. 45 min. 65 min.

NOTE: Cycle times are approximate and may vary depending on instrumental loads.

  • Bowie & Dick Test Cycle  – Verify effective steam penetration. Also suitable for testing air removal with Helix test
  • Leak Test Cycle – Verify the integrity of the pressure vessel and its plumbing on a daily or weekly basis

Technical Specifications

Chamber Volume

  • 19 Liter

Chamber Dimensions (Ø x L)

  • 230mm x 470mm

Overall Dimensions (D x W x H)

  • 545mm x 510mm x 365mm

No. of Trays

  • 3

Tray Dimensions (D x W x H)

  • 415mm x 170mm x 20mm

Standard Cassette Capacity*

  • 2 full and 2 half

Shipping Weight

  • 39 kg

Voltage & Frequency

  • 230V
    50-60 Hz

Power & Current

  • 1400 W
  • 12A

*Standard full size cassette is 203 x 280 mm and standard half size cassette is 203 x 140 mm.

Standards and directives

(a partial list)

Standards

  • ANSI/AAMI ST-55:2010 FDA 510K cleared (Elara 11)
  • EN 61010-1: 2010 Safety Requirements for measurement control and laboratory use
  • EN 61326-1: 2006 for EMC Requirements for Electrical Equipment
  • EN 61010-2-40: 2005 Safety requirements for sterilizers used to treat
    medical materials
  • EN 17665-1: 2006 Sterilization of health care products – moist heat

Pressure Vessel

  • AAll pressure vessels and boilers are certified according to ASME code section I and section VIII, Div. I and PED 97/23/EC – Pressure Equipment Directive

Quality Standards

  • ISO 9001:2008 Quality Management Systems
  • EN ISO 13485:2012 Quality Management System – Medical Devices

Directives

  • MDD 93/42/EEC amended in Directive 2007/47/EEC
  • 2002/96/EC WEEE and 2002/95/EC RoHS

Download Brochure